ETSI EN 301 489-11

The present document, together with EN 301 489-1 [1], covers the assessment of transmitters, exciters, and anyassociated ancillary equipment dedicated for radio broadcasting services, in respect of ElectroMagneticCompatibility (EMC).

Technical specifications related to the antenna port emissions and cabinet radiation are not included in the presentdocument. Such technical specifications are found in the relevant product standards of ETSI for the effective use of theradio spectrum.

The present document specifies the applicable test conditions, performance assessment and performance criteria forterrestrial sound broadcasting transmitters and their associated ancillary equipment.

Definitions of the type of broadcast transmitters and exciters covered by the present document are given in annex B.

In case of differences (for instance concerning special conditions, definitions, abbreviations) between the presentdocument and EN 301 489-1 [1], the provisions of the present document take precedence.

The environmental classification and the emission and immunity requirements used in the present document are asstated in EN 301 489-1 [1], except for any specific conditions included in the present document, under which broadcastservice transmitters are typically used.

The present document may not cover those cases where a potential source of interference which is producingindividually repeated transient phenomena or continuous phenomena is permanently present, e.g. a radar site in the nearvicinity. In such a case it may be necessary to use special protection applied to either the source of interference or theinterfered part or both.

Edition:

1.3.1

Published:

05/01/2006

Number of Pages:

23

File Size:

1 file , 130 KB

Note:

This product is unavailable in Russia, Ukraine, Belarus