ETSI EN 302 842-2

ETSI EN 302 842-2 applies to the following radio equipment types:

• Very High Frequency (VHF) Digital Link (VDL) Mode 4 aeronautical mobile (airborne) radio transmitters,transceivers and receivers for air-ground and air-air communications operating in the VHF band, usingGaussian Filtered Frequency Shift Keying (GFSK) modulation with 25 kHz channel spacing and capable oftuning to any of the 25 kHz channels from 112,000 MHz to 136,975 MHz as defined in ICAO VDLSARPs [i.2].

The present document provides part 2 of the technical specifications.

The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAOVDL SARPs [i.2] and ICAO VDL4 Technical Manual [i.1].

NOTE: In clause 5.1.4, Tertiary time, as described by the ICAO VDL4 Technical Manual [i.1], has not beenincluded as a requirement in the present document due to the opinion of the ETSI Working Group thatinsufficient evidence was available to be able to verify correct operation of a “floating network” ofstations operating on tertiary time.

Manufacturers should note that in future the tuning range for the transmitter and the receiver may cover any 25 kHzchannel from 108,000 MHz to 111,975 MHz.

The present document applies to “aeronautical mobile (airborne and in some cases ground vehicles)” equipment whichwill hereinafter be referred to as “mobile” equipment.

The scope of the present document is limited to mobile stations. The equivalent specification for ground stations isETSI EN 301 842 [i.5].

Edition:

1.4.1

Published:

04/01/2015

Number of Pages:

410

File Size:

1 file , 2 MB

Note:

This product is unavailable in Russia, Ukraine, Belarus