ECIA EIA-60938-2-2

ANSI APPROVED * SAME AS IEC 60938-2-2

INTRODUCTION

Blank detail specification

This blank detail specification forms the basis for a uniformprocedure for a common mark. It implements the approval schedulefor safety tests only in IEC 60938-2, requires a declaration ofdesign for parameters relevant to safety tests and prescribesconformance tests to be conducted on every lot prior to its releaseand re-qualification tests depending on changes of the design.

In comparison with IEC 60938-2-1 which provides safety tests andperformance tests, this specification is restricted to safety testsonly.

The use of IEC 60938-2-1 may be more appropriate for componentsmanufactured in mass production, whereas this specification may benecessary in those cases where approval and re-qualification testscontribute considerably to the costs of the product.

A blank detail specification is a supplementary document to thesectional specification and contains requirements for style andlayout and minimum content of detail specifications. In thepreparation of detail specifications the content of 1.4 of thesectional specification shall be taken into account.

The numbers between square brackets on the first page of thedetail specification correspond to the following information whichshall be inserted in the position indicated.

Edition:

14

Published:

07/01/2014

ANSI:

ANSI Approved

Number of Pages:

14

File Size:

1 file , 130 KB