BHMA A156.30-2003

1.1 This standard includes securityperformance based requirements for both mechanical and electrified high security cylinders. For the purpose of this standard, High Security Cylinder includes mechanical lock cylinders, electromechanical cylinders, and the electronic lock sub assemblies that are analogous to the cylinder assemblies. Cylinders include their keys or electronic credentials; their detainers (mechanical pins, levers, discs) or electronic control device; and their cylinder tailpiece or cam or electronic output port.

1.2 Tests described in this Standard are performed under laboratory conditions. In actual usage, results vary because of installation, maintenance and environmental conditions.

1.3 Levels and Grades

1.3.1 LevelsManufacturers shall indicate the high security level of their cylinders. Cylinders shall meet all the tests for their level listing, indicated in accordance with Section 8. Levels indicate special security features and are separate from Grades. A lockset mated with a cylinder having no Grade listing, even though the cylinder has a high security level is considered ungraded.

1.3.2GradesTo obtain cylinder Grade listings, and for the mating lock to retain its Grade listing, cylinders must be tested in accordance with ANSI/BHMA A156.5 for Auxiliary Locks and Associated Products. Assemblies take the grade of the lowest graded component.Electrified products shall also meet the requirements of A156.25 for Electrified Locking Devices to obtain a grade listing.

This item is available as part of a discounted standards set covering Door Locks.

Published:

01/28/2003

ANSI:

ANSI Approved

Number of Pages:

19

File Size:

1 file , 480 KB

Note:

This product is unavailable in Russia, Ukraine, Belarus