ETSI TS 136 124

ETSI TS 136 124 establishes the essential EMC requirements for “3rd generation” digital cellular mobile terminalequipment and ancillary accessories in combination with a 3GPP E-UTRA user equipment (UE).

The equipment conforming to the requirements laid out in the present document and used in its intendedelectromagnetic environment in accordance with the manufacturers instructions

• shall not generate electromagnetic disturbances at a level which may interfere with the intended operation ofother equipment;
• has an adequate level of intrinsic immunity to electromagnetic disturbances to operate as intended;

The present document specifies the applicable EMC tests, the methods of measurement, the frequency range, the limitsand the minimum performance criteria for all types of E-UTRA UE’s and their accessories. E-UTRA base stationequipment operating within network infrastructure is outside the scope of the present document. However, the presentdocument does cover mobile and portable equipment that is intended to be operated in a fixed location while connectedto the AC mains. E-UTRA base stations in the radio access network are covered by the technical specificationTS36.113 [2].

Requirements for the radiated emission from the enclosure port of integral antenna equipment and ancillaries have beenincluded. Technical specifications for conducted emissions from the antenna connector are found in the 3GPPspecifications for the radio interface, e.g. TS36.521 [3], for the effective use of the radio spectrum.

The immunity requirements have been selected to ensure an adequate level of compatibility for apparatus in residential,commercial, light industrial and vehicular environments. The levels however, do not cover extreme cases, which mayoccur in any location but with low probability of occurrence.

The environment classification used in the present document refers to the environment classification used in the GenericStandards IEC 61000-6-1 [4], IEC 61000-6-3 [5], except the vehicular environment class which refers toISO 7637 Part 1 [6] and Part 2 [7].

Compliance of radio equipment to the requirements of the present document does not signify compliance to anyrequirement related to the use of the equipment (i.e. licensing requirements).

Compliance to the requirements of the present document does not signify compliance to any safety requirement.However, any temporary or permanent unsafe condition caused by EMC is considered as non-compliance.

Edition:

13.0.0

Published:

01/01/2016

Number of Pages:

33

File Size:

1 file , 230 KB

Note:

This product is unavailable in Russia, Ukraine, Belarus