General Description
This standard describes data services available on spreadspectrum systems. It is organized into a series of relatedrecommendations, some of which address functions common to allCDMA2000® 1 data services, and others whichdescribe a specific data service.
The recommendations included in this series are:
Data Service Options for Spread Spectrum Systems: Introductionand Service Guide
Data Service Options for Spread Spectrum Systems: Radio LinkProtocol Type 1
Data Service Options for Spread Spectrum Systems: AT CommandProcessing and the Rm Interface
Data Service Options for Spread Spectrum Systems: Async Data andFax Services
Data Service Options for Spread Spectrum Systems: Packet DataServices
Data Service Options for Spread Spectrum Systems: STU-IIIServices
Data Service Options for Spread Spectrum Systems: Analog FaxService
Data Service Options for Spread Spectrum Systems: Radio LinkProtocol Type 2
Data Service Options for Spread Spectrum Systems: High SpeedPacket Data Services
Data Service Options for Spread Spectrum Systems: Radio LinkProtocol Type 3
Data Service Options for Spread Spectrum Systems: Service Option34
Data Service Options for Spread Spectrum Systems: ServiceOptions 33 and 66
Data Service Options for Spread Spectrum um Systems: cdma2000ISDN Interworking Service Option 37
A recommendation may be referred to by its designation (e.g.,IS-707-A.1) or by its relative chapter number (e.g., Chapter 1means IS-707-A.1, Chapter 2 means IS-707-A.2, etc.).
This chapter provides an overview of the document’s content,describes the simplified network reference model applicable to dataservices, introduces the data services, and discusses intersystemsupport for data services. Chapter 2 defines the Radio LinkProtocol used by some data services to transport octets between themobile station (MS) and BS/MSC. Chapter 3 is concerned with ATCommand processing and the Rm interface. Chapter 4 definesasynchronous (hereafter called async) data service and Group-3facsimile (hereafter called fax) service. Chapter 5 details apacket data bearer service compatible with many packet datanetworks. Chapter 6 describes a service that carries securecommunications from U.S. Government digital STU-III terminals.Chapter 7 details how service is provided to analog fax machinesconnected to a spread spectrum system. Chapter 8 defines Radio LinkProtocol Type 2 that uses the services defined in TIA/EIA-95-B toallow increased transmission speeds. Chapter 9 describes a packetdata bearer service that provides higher rates (greater than therates possible using chapter 5) by using RLP Type 2 and otherservices defined in TIA/EIA-95-B.
The following verbal forms are used throughout all chapters.Shall and shall not identifyrequirements to be followed strictly to conform to the standard andfrom which no deviation is permitted. Should andshould not indicate that one of severalpossibilities is recommended as particularly suitable, withoutmentioning or excluding others; that a certain course of action ispreferred but not necessarily required; or that (in the negativeform) that a certain possibility or course of action is discouragedbut not prohibited. May and maynot indicate a course of action permissible within thelimits of the standard. Can andcannot are used for statements of possibility andcapability, whether material, physical, or causal.
1 CDMA2000® is the trademark for thetechnical nomenclature for certain specifications and standards ofthe Organizational Partners (OPs) of 3GPP2. Geographically (and asof the date of publication), CDMA2000® is a registeredtrademark of the Telecommunications Industry Association (TIA-USA)in the United States.
- Edition:
- B
- Published:
- 09/01/2009
- Number of Pages:
- 28
- File Size:
- 1 file , 3.1 MB
Reviews
There are no reviews yet.